Library Special Collections: Climate Control for Acidic Paper

Deacidification treats the sheet. The air keeps delivering new acid. This page is about the second half of the problem — and why a room at 45% RH can still be losing its collection.

See CJS-HP100B specs

Why 20th-century paper fails faster than 18th-century paper

Rag paper from 1750 often survives better than a 1950 paperback. The difference is the furnish: groundwood pulp and rosin-alum sizing left lignin and acid in the sheet, and those build on themselves.

Acid already in the paper

Hydrolysis breaks cellulose chains. The sheet yellowed before it reached your shelf, and it keeps going.

Acid arriving from the air

SO₂ and NO₂ from urban air, plus acetic acid from wooden shelving and storage boxes, add to what is already in the sheet.

Moisture as the accelerant

Every percentage point of RH speeds the reaction. Damp air does more damage to acidic paper than to any other common library material.

Handling accelerates it

Brittle paper fails at the fold. A book that is never requested still degrades chemically in the stack.

Mass deacidification treats what is in the sheet. It does nothing about what the air keeps delivering — which is why a treated collection can re-acidify in a polluted store.

What the room has to do

Hold 30–50% RH

ISO 11799 puts document storage in that band with limited fluctuation. Wide swings do more damage than a steady value at the edge.

Scrub the acids

Recirculating filtration with a molecular acid-removal stage reduces the acid load that would otherwise deposit on the collection.

Filter the dust

Particulates carry adsorbed acids and act as abrasive grit during handling. PM2.5 removal above 99.9% per report 2023AK-0060.

What we can and cannot claim: dehumidification 4.52 kg/h, humidification 7.53 kg/h, PM2.5 >99.9%, 225.3 W are type-tested in report 2023AK-0060. Acid-gas efficiency is supplier-reported (≥99.9%) and not part of that report — we will commission a third-party retest for a tender rather than quote an unsourced figure.

Reading rooms are the hard part

A reading room has people, doors and daylight, and it usually shares a wall with the stacks. Closing the store and conditioning it separately is better than trying to keep both at archival targets. We will size the store alone if that is what the building allows.

Questions buyers actually ask

Our stacks are already at 45% RH. Do we still need this?

Humidity is one of two variables. If the room is in a polluted urban area, or has wooden shelving, the acid load can keep rising while RH looks correct. That is the case for gas-phase filtration.

Does it replace deacidification?

No. Deacidification treats the paper; this treats the air. A treated collection in an acidic store will re-acidify.

Can it work in a room with no ducting?

It is a standalone recirculating unit, so it needs floor space, a power supply and condensate handling, not ductwork.

How often does the filter need changing?

It is a consumable and the interval depends on pollutant load and running hours. We quote it per project rather than as a calendar figure.

Will it help with mould in a basement store?

Holding RH in band removes the condition mould needs. Existing mould needs remediation first — a dehumidifier does not clean a contaminated collection.

Other environments we spec for

National and municipal archives →

Deed rooms and permanent paper collections.

Museum and gallery storage →

Reserve collections, textiles and metals.

Film and AV archives →

Acetate film and magnetic tape.

Send the room, get the sizing

Email the room dimensions, current RH readings and the retention requirement. You get a sizing recommendation and a quotation — not a brochure.

WhatsApp +86 177 1055 7225
📩 Get Best Price (Quote in 12h)📩 获取最优报价(12小时内回复)